Got a new CAME remote, but don't know how to program it? Don't panic, because you will get there soon enough with this tutorial.
In the world of solutions for the home and automation, you are in a good position Cam. Since the years 1972, the company has distinguished itself in the production of a varied range ofCame automation for gates, industrial doors, access control and others. The firm combines its expertise with great professionalism in research. In short, everything is put to work to offer you the best possible services.
To control your Gate Motorization, you need a Universal remote controller. It is indeed a button of this Remote control which will allow you to take control, but also to open or close it. How to program it? headset3
Need an additional remote control?
Before going any further, be aware that the CAME TOP-432NA remote control is now replaced by the TOP-432EV. Regarding the programming from your remote control, the operation is very simple and only takes a few minutes. For that, you just have to follow these steps:
- Keep the 2 buttons on the top 432EV remote control pressed simultaneously for 6 or even 8 You will then see the LED flash more quickly, then you will release the buttons.
- Now press the button you want to save once. You will then see the LED light up steadily.
- To finish with this first part, hold your old remote control with the nose against the back of the new CAME TOP 432EV. It is also possible to do this, by putting the two remote controls back to back.
Once all this is done, you are not far from being able to use your brand new Remote Came Gate. Now is the time to take the next step.
Take your remote control in hand
Have you completed the preliminary steps? Now is the time to continue, with the remaining steps. At the end, you will be able to operate the opening or closing of your roller shutter with a simple remote control. So :
- Press and hold the button on your old remote control, which will flash the new one 3 times. If you observe this result, then you have successfully completed the programming.
- Now you are going to release the button on your Universal remote controller CAME top432EV
- Then redo the operation if necessary for all the other keys you want to record
With all of that done, it's time to see if your setup is up and running. You are now going to test your top432EV remote control. However, the specialists specify in the case of a new installation that the instructions of the radio receiver must be strictly followed. These will help you register the first remote control to the receiver, and you can then use these instructions to program subsequent remote controls.
So here is how to program your CAME remote control in a few seconds. Remember to follow the different steps mentioned above to the letter. If you follow them in order, then your programming will be a great success. You can then follow the same procedure to program all the other remote controls of the firm. Take control of your garage gate, just with a simple touch: it's now possible.
Need an additional remote control?
|1||CAME -TOP432EE Mando Remote control||24,00 € 18,78 €||See the offer|
|2||Came TOP432EE - Programmable transmitter top 433.92 mhz -bichannel top 432 na - No. of channels 2||24,00 € 19,90 €||See the offer|
|3||A||98 Commentaires||36,46 € 28,28 €||See the offer|
|4||Lot de 5 télécommandes CAME TOP432EE (ex-TOP 432NA)||65,86 € 58,00 €||See the offer|
|5||CAME Gate remote control CAME Came TOP432NA top432ee (EX) Key Fob 2 Transmitter button 433 MHz||19,90 €||See the offer|
|6||Came TOP-432EE Télécommande 433.92 MHz, Noir||19,90 €||See the offer|
|7||CAME TOP432EE Remote control||656 Commentaires||19,70 €||See the offer|
|8||CAME - Telecommande CAME TOP862EE, 868.35 MHz, 2 Boutons||35,00 € 25,06 €||See the offer|
|9||Came TOP-434EE Télécommande 4 canaux quadricanal Multicolore||25,00 €||See the offer|
|10||remote control - 4 channels - dual frequency - fixed code - black - cam 806ts-0102||26,90 €||See the offer|